Inquiry For Liaison Service
Sector abcCrude Oil / Natural Gas / Mineral FuelsTender ValueN.A.
LocationAssam - India Ref.No51849176
Closing Date14 - Sep - 2022
Supply of 3.3/8"-3/5 inch tag perforation charges & accessories and 2 1/8" through tubing perforation charges & accessories 54 mm (2.1/8") strip carrier 0 deg. phased, well logging equipment, splice boot for lead wire.(100 nos./pkt), deto cord end seal, cased hole logging equipment,, hmx booster( bidirectional) for use in tandem gun, 3-3/8" (86 mm) blast sleeve, well logging explosives, detonating cord hmx 80 gr/ ft. rilsan/teflon or equivalent jacketed low shrink, well logging equipment, sdp tag charges, super deep tag charges, booster kit-for tag gun assy, detonators for tag gun-(fluid sensitive). adaptable to 80 gr/ft detonating cord. temp rating 325°f (163°c) min, rf-safe electronic detonators-fluid disabled-temperature resistant temp rating 325°f, 3-3/8"x 3.5/4 ft.(1m) 6 spf gun assy.-tag gun 3 3/8"(86 mm)- 3.5''(89 mm)od x 3.5 ft./4 ft./(1m) 6 spf- threaded type complete shipping /gun assy. for tag gun charges. ( includes scallop gun- 3.5 ft/4ft/1m, tube charge holder -3.5 ft/4 ft/1m, fixture alignment, snap ring, screw, cap etc.), 3/8"(86 mm)- 3.5''(89 mm)od x 7 ft.(2m) 6 spf- threaded type complete shipping /gun assy. for tag gun charges. (includes scallop gun- 7ft/2m, tube charge holder -7ft/2m, fixture alignment, snap ring, screw, cap etc.), 3 3/8"(86 mm)- 3.5''(89 mm)od x 11 ft.(3m) 6 spf- threaded type complete shipping /gun assy. for tag gun charges.( includes scallop gun- 11 ft/3m, tube charge holder -11ft/3m, fixture alignment, snap ring, screw, cap etc.), 3 3/8"(86 mm)- 3.5''(89 mm)od x 14 ft./15 ft./5m 6 spf- threaded type complete shipping /gun assy. for tag gun charges. (includes scallop gun- 14 ft./15 ft./5m, tube charge holder -14 ft./15ft /5m, fixture alignment, snap ring, screw, cap etc.) 3-3/8'' tag gun- tandem sub threaded type 3-3/8''(86 mm) tag gun- threaded type tandem sub o-ring set for top sub-3-3/8'' tag gun. 3-3/8'' (86mm) tag gun-o-ring set for top sub-details to be provided. g if top sub needs 2 o-rings, 1 set = 2 o-rings) o-ring set for bull plug-3-3/8'' tag gun 3-3/8'' tag gun-o-ring set for bull plug. details to be provided.(e. g if bull plug needs 2 o-rings, 1 set = 2 o-rings), o-ring set for tandem sub-3-3/8'' tag gun, 3-3/8''(86mm) tag gun-o-ring set for tandem sub. details to provided. (e .g if tandem sub needs 4 o-rings, 1 set = 4 o-rings) teflon lead wire assy. with contact spring-for 3-3/8'' tag gun contact holder (boot)-3-3/8'' tag gun, contact holder (boot) for teflon lead wire assy. with contact spring-3-3/ tag gun, 3-3/8'' tag gun top sub (firing head) go-type-, 3-3/8''(86 mm) tag gun-threaded type top sub (firing head) with tubular nut if any- go-type compatible with quick change assembly 3-3/8'' tag gun- bull plug/bottom sub, 3-3/8''(86 mm) tag gun-threaded type bull plug/ bottom sub, rf-safe electronic detonators-temperature- and pressure resistant- exposed to fluid & suitable to use with ttp. temp rating 325 °f. pressure rating 15000 psi., detonating cord/ charge 'clips' for fixing detonating cord with ttp charges during ttp gun assembly., part no. 7902737, detonator cord retainer, part no. 2329002, 2.1/8" charge tightening wrench for 0° phase ttp gun system part no. 2326021, deep penetration (dp) 53.975 mm (2.1/8")through tubing perforation system (zero degree phase) & accessories. accessories for above, 2.1/8 inch,54mm(max) through tubing deep penetration perforation charge, hmx 0° phased having the following specification , temp.rating 350°f (177°c) min. pressure rating 15000 psi (1057 kg/cm.sqr.)min. minimum acceptable performance in 5.1/2" cemented (concrete) casing per api 'rp-19b' recommended practice are as follows ehd(min.) = 0.28" (7.12 mm) min., t.t. penetration = 29"(736 mm) min. normalized to 5000 psi part no. 2810661, tandem connector for connecting the above 2.1/8" strip carriers. part no. 100005423, part no. 2323509 of dyna energetics europe gmbh 53.975 mm (2.1/8" od) firing head assy./top sub with thread connection to match with 2.1/8" / 1.11/16" mpd. part no. 2323470, nut & bolt for connecting 2.1/8" o.d. strip carrier to the firing head/top sub (one bolt and one nut consists of one set), part no. 100005517+100005519 of halliburton export inc, part no. 2819118 of dyna energetics europe gmbh, nut and bolt to connect strip carriers in the tandem part no. 2329001
If you are a new user, then please register, it's Free and then fill the form below.

If you are registered with us, just fill the form below, we will get back to you shortly.


All fileds marked with '*' are compulsary.
Email Id : *
Comments: *
 Login/Register
Members/Visitors Login to continue
 Email Id:
 Password:


 Forgot Password?
 Tenders by Industry
Skip Navigation Links.
Expand Construction TendersConstruction Tenders
more  »
Tenders by Ownership
Central Government/Public Sector Tenders
Co-operatives Tenders
Corporations/ Associations/ Others Tenders
Education & Research Institutes Tenders
Joint Sector Tenders
Non classified Tenders
Private Sector Tenders
Research Institutes Tenders
State Government Tenders
Trust Tenders
 Tenders by State in India
Andhra Pradesh Tenders
Delhi Tenders
Gujarat Tenders
Madhya Pradesh Tenders
Maharashtra Tenders
Rajasthan Tenders
Tamil Nadu Tenders
Uttar Pradesh Tenders
West Bengal Tenders
more  »